This paper model contains parts designed and developed by Chris (C-Mags) Magnell to enhance Marek's 1:50 OEF-built Albatros D.III models. The kit consists of a new fuselage former and cockpit bulkheads, along with detail parts for the "front office". Additionally, two new upper-fuselage panels are provided, appropriately colored to go with Marek's two OEF Albatros D.III kits.
The successful Albatros D.III was license-built in Austria-Hungary by Oeffag. OEF-built D.III models were developed through 3 series, with important internal and external differences from their German counterparts. A number of OEF Albatros fighters survived the war ... $1.50
Date Added: Wednesday 08 September, 2010 Manufacturer: Chris Magnell
This paper model kit builds a Fokker D.VII fighter in postwar service with Finland. The model depicts the aircraft as fitted with a ski undercarriage, for use in Finland's harsh winters.
The Fokker D.VII was considered Germany's finest fighter design of World War One, and it continued to find favor in the post war environment, flying with a number of air forces worldwide. Fokker continued to manufacture the D.VII for several years after the Armistice from his new factory in his native Holland, starting with components that were smuggled out of Germany before the end of the war.
Paper Model Features
217 parts with full cockpit, duo-... $6.00
Date Added: Wednesday 08 September, 2010 Manufacturer: Fitter
The Avia S-107 was a license-built copy of the MiG-21F-13, produced in Czechoslovakia. A total of 194 were built for service in Czechoslovakia and for export between 1962 and 1972. The Avia-built airframes were equipped with Soviet-supplied engines, and had minor external differences with their Soviet-built counterparts.
One of the most produced combat aircraft in history, the Mig-21 and its license-built sisters have been flown by some 44 air forces around the world, and are still being used in front- or second-line service in 18. Additionally, several MiG-21s are operated by private corporations or individuals in the Unit... $4.95
This paper model features photo-realistic parts, and a step-by-step illustrated assembly guide. Parts count: 76. PDF size: 10 pages.
The pistol had its origins in the US Army Joint Psychological Committee and was designed for the United States Army in 1942 by the Inland Guide Lamp Manufacturing Division of the General Motors Corporation in Dayton, Ohio. The army designated the weapon the Flare Projector Caliber .45 hence the designation FP-45. This was done to disguise the fact that a pistol was being mass produced. The original engineering drawings label the barrel as \"tube\", the trigger as \"yoke\", the firing pin as \"control rod\", a... $5.00
Date Added: Tuesday 07 September, 2010 Manufacturer: Trent C Henry
The Bloch MB 200 was a French day/night bomber, first designed in 1932 and produced in France and Czechoslovakia (under license). Some aircraft were still serving in both countries’ air forces when World War Two began.
A transitional design, the MB 200 had fully cantilevered wings, a closed cockpit, and was of mostly metal construction, but still had fixed landing gear. Turrets were manually operated and fitted with one gun each.
Bulgaria was issued some captured MB 200’s for employment as a German satellite air force in 1940. This paper model depicts one of these Bulgarian aircraft.
Paper Model Features:
Diagram instructions, 39 ... $3.50
Date Added: Tuesday 07 September, 2010 Manufacturer: der Kampfflieger
The Bloch MB 200 was a French day/night bomber, first designed in 1932 and produced in France and Czechoslovakia (under license). Some aircraft were still serving in both countries’ air forces when World War Two began.
A transitional design, the MB 200 had fully cantilevered wings, a closed cockpit, and was of mostly metal construction, but still had fixed landing gear. Turrets were manually operated and fitted with one gun each.
Bulgaria was issued some captured MB 200’s for employment as a German satellite air force in 1940. This paper model depicts one of these Bulgarian aircraft.
Paper Model Features:
Diagram instructions, 39 ... $3.50
Date Added: Tuesday 07 September, 2010 Manufacturer: der Kampfflieger
This paper model kit builds the entire F3F squadron based off the USS Yorktown!
The Grumman F3F was the last American biplane fighter aircraft delivered to the United States Navy, and served between the wars. Designed as an improvement on the single-seat F2F, it entered service in 1936. It was retired from front line squadrons at the end of 1941 before it could serve in World War II, and was first replaced by the Brewster F2A Buffalo. The F3F, which inherited the landing gear configuration first used on the Grumman FF, served as the basis for a biplane design which was ultimately developed into the much more successful F4F Wildcat. When ... $15.00
Date Added: Tuesday 07 September, 2010 Manufacturer: Adirondack Aircraft (Kampflieger
Mike Bauer's "Paper Stomp Rockets" are real flying card model Rockets and Airplanes!Powered by a compressed air system that you build (thats the "Stomp" part!), these "rocket" flyers can soar over and over again. Some Paper Stomp Rocket designs will fly to heights over 150ft! They are completely reusable, and come with replaceable NoseCones for quick repairs. Every Paper Model Stomp Rocket includes detailed assembly, launch and flight instructions and diagrams, including plans for the Stomp Bottle Launch System.
The Aircraft "Fighter" Series features Paper Model Stomp Rockets as detailed representations of famous Fighter Aircraft. Th... $6.00
Date Added: Saturday 04 September, 2010 Manufacturer: Dave Winfield:Mike Bauer Repaint
Mike Bauer's "Paper Stomp Rockets" are real flying card model Rockets and Airplanes!Powered by a compressed air system that you build (thats the "Stomp" part!), these "rocket" flyers can soar over and over again. Some Paper Stomp Rocket designs will fly to heights over 150ft! They are completely reusable, and come with replaceable NoseCones for quick repairs. Every Paper Model Stomp Rocket includes detailed assembly, launch and flight instructions and diagrams, including plans for the Stomp Bottle Launch System.
The Aircraft "Fighter" Series features Paper Model Stomp Rockets as detailed representations of famous Fighter Aircraft. Th... $6.00
Date Added: Saturday 04 September, 2010 Manufacturer: Dave Winfield:Mike Bauer Repaint
Mike Bauer's "Paper Stomp Rockets" are real flying card model Rockets and Airplanes!Powered by a compressed air system that you build (thats the "Stomp" part!), these "rocket" flyers can soar over and over again. Some Paper Stomp Rocket designs will fly to heights over 150ft! They are completely reusable, and come with replaceable NoseCones for quick repairs. Every Paper Model Stomp Rocket includes detailed assembly, launch and flight instructions and diagrams, including plans for the Stomp Bottle Launch System.
The Aircraft "Fighter" Series features Paper Model Stomp Rockets as detailed representations of famous Fighter Aircraft. Th... $6.00
Date Added: Saturday 04 September, 2010 Manufacturer: Dave Winfield:Mike Bauer Repaint
